， This is used in
combination with rod packing to absorb the impact
and fluctuating
pressure at high load, to isolate high temperature
fluid, and to improve the durability of the packing.
， Special in hoom(10m/roll)
enabling to be cut according to the cylinder diameter.
， I-flon is used material, This wear ring has low
frictional resistance eliminating stick slip.
， This has excellent compression proof and wear
resistance becaus of its fabric reinforced laminated
phenolic resin material.
， One bias-cut is providee on the ring.
IWR
Fabric reinforced phenolic resin(RS-1)
， This is same function as that
of IBY.
， thihs has small friction resistance and suits
for high speed, extremely short stroke operation.
， A slit the tapered surface(not-sliding surface)
can leak back pressure.
IZT
I-flon, PTFE resin(IPP)(IPP-1)
， This is used in combination
with piston packing and wear rings to prevent damages
of packings caused by foreign object in oil within
the cylinder and to assure long lif of packings.
， When used in combination with rod packing and
metal bush, damages of the rod can be prevented
because of the foreign objec submerging fuction
of I-flon.
， One point cut is provided and oil provided and
oil pressure bypass slot is also provided to prevent
pressure accumulation.
IRT2
I-flon,
PTFE resin(IPP)(IPP-1)
， This is used in prevent
extrusion of packings and to improve the pressure
resistane of packings.
， Standard cutting
shape is bias-cut(IRT2). If there are no problem
for installation, no cut endless type(IRT3) can
be also used.
IRT3
IRN2
Polyamide
resin(NP-1)(NM-1)
， Standard cutting
shape is bias-cut(IRN2). If there are no problem
for installation, no cut endless type(IRN3) can
be also used.
IRN3
128-18
Seoun-dong, Kyeyang-gu, Incheon, Korea
Tel: 82-32-549-4442, Fax: 82-32-552-8204, E-mail: arrowseal@ipassco.com
Copyright(c) 2001 by I-PASS Corporation All rights reserved.
